|
Meets
the requirements of the relevant British Standards for the
whole of the UK. Also meets the requirements of the Scotland
Building Regulations 1999 Part F.
The
Highlander-7 has been developed using the best burning technology
to give you a stove with clean burn and high efficiency.
The
Super Air Wash System has been designed to keep the glass
clean to give a full view of the superb flame pattern, created
as the flames rise to meet the incoming air, this causes
secondary combustion to take place, resulting in clean burn
with dancing flames.
The
Highlander has also a superb shaker grate mechanism, which
allows you to set the grate for efficient woodburning (large
logs up to 360mm long) or any other solid fuel including
peat, coal, coal briquettes and of course all HETAS approved
smokeless fuels.
Finished
in heat resistant metallic black stove enamel pain, and
fitted with solid brass handles, black handles are available
on request.
|
|
An
automatic door safety device is fitted which prevents
the bottom door from opening before the top door is
open. This prevents serious overfiring when removing
the ashes from below the grate.
|
| The
Highlander-7 is available with steel or Stainless Steel
3kW Boiler see below for code no. |
| The
Highlander-7 and -5 are available with matching canopy
on request, this can be removed or replaced at any time. |
| Both
Highlander-7 and -5 are also available with top or rear
flue outlet. |
|
|
 The
Highlander has two controls. The one above the main door
controls the amount of air required for the air wash system.
By sliding the control left to close, right to open the
air inlet holes, which then preheats the air before directing
it down over the inside of the ceramic glass. This keeps
the products of combustion away from the glass and also
creates secondary combustion to increase efficiency and
reduce smoke emissions from the flue.
The
control below the main door is to adjust the amount of air
required for easy lighting and rapid warm up, this also
controls the flow of air for varying fuels as required.
The msot suitable setting will quickly be found. Move the
slide slowly to find the suitable position. Using the correct
rate of burning efficiencies of up to 70% can be obtained.
|
